Speed increasers, speed reducers and spur gear units
Comer Industries completes its traditional range of mechanical products for power transmission with advanced engineering systems and mechatronic solutions for agricultural machinery, industrial equipment and energy applications.
Comer Industries mission has evolved from supplying products and single components to offering complete power transmission systems and total customer service in response to O.E.M. needs in kinematics.
Gearboxes & Driveshafts products are used mainly in the following sectors: soil treatment and processing machines, hay harvesting and fodder treatment machines and crop irrigation and treatment machines. A total of 400,000 gearboxes, in more than 2,000 different version, are produced annually, thus offering customers numerous speed ratios and a wide assortment of power level ranging from 3.6 to 150 kW.
Speed increasers
Features:SHAFT AND GEARS:Alloy steel construction according to Standard:UNI EN 10084UNI EN 10083GEARBOXES:Grey cast iron according: UNI EN 1561Sferoidal Cast Iron according: UNI EN 1563Alloy Aluminium according: UNI EN 43100Steel cold-forming according: UNI EN 10149LUBRIFICATION AND MAINTENANCEComer Industries gearboxes are usually supplied without lubricant: recommended oil types are indicated on the catalogue. The first oil change should be effected after the first 50 working hours: subsequent changes should take places after 500-800 hours or at least once a year in order to avoid sludge deposits, change the oil while it is still warm after gearbox stopping. All plugs should be cleaned. Periodically, check the oil level and top up the gearbox if necessary.
WEITERLESEN
Speed reducers
Features:SHAFT AND GEARS:Alloy steel construction according to Standard:UNI EN 10084UNI EN 10083GEARBOXES:Grey cast iron according: UNI EN 1561Sferoidal Cast Iron according: UNI EN 1563Alloy Aluminium according: UNI EN 43100Steel cold-forming according: UNI EN 10149LUBRIFICATION AND MAINTENANCEComer Industries gearboxes are usually supplied without lubricant: recommended oil types are indicated on the catalogue. The first oil change should be effected after the first 50 working hours: subsequent changes should take places after 500-800 hours or at least once a year in order to avoid sludge deposits, change the oil while it is still warm after gearbox stopping. All plugs should be cleaned. Periodically, check the oil level and top up the gearbox if necessary.
WEITERLESEN
Spur gear units
Features:SHAFT AND GEARS:Alloy steel construction according to Standard:UNI EN 10084UNI EN 10083GEARBOXES:Grey cast iron according: UNI EN 1561Sferoidal Cast Iron according: UNI EN 1563Alloy Aluminium according: UNI EN 43100Steel cold-forming according: UNI EN 10149LUBRIFICATION AND MAINTENANCEComer Industries gearboxes are usually supplied without lubricant: recommended oil types are indicated on the catalogue. The first oil change should be effected after the first 50 working hours: subsequent changes should take places after 500-800 hours or at least once a year in order to avoid sludge deposits, change the oil while it is still warm after gearbox stopping. All plugs should be cleaned. Periodically, check the oil level and top up the gearbox if necessary.
WEITERLESEN
