Division Industrial Gearmotors

Division Industrial Gearmotors

Motovario offers a wide range of products to meet the needs of numerous industrial sectors such as mechanical speed variators, helical and helical bevel gear reducers, shaft mounted, worm gear reducers, electric motors and motoinverters. Quality and precision are ensured by the cutting-edge technologies applied in the production process. Motovario products are reliable, robust and versatile - the best-qualified solution for any requirement in power transmission.

Worm Geared Motors info

NMRV Series
  • Sizes: 025 -030-040-050-063-075-090-105-110-130-150  
  • Available versions: NMRV - fitted for motor coupling, NRV - with input shaft, NMRL - with torque limiter  
  • Power up to 15 kW  
  • Patented case with modern design  
  • Aluminuium units are supplied complete with synthetic oil which allows universal position mounting, with no need to modify lubricant quantity. Moreover units without plugs reduce the risk of oil oxidation and contamination.  
  • Reduction ratios between 5 and 100  
  • Max torque 1.550 Nm and admissible radial loads max 16.500 N
  • Cases up to 105 in die-cast aluminium alloy and over 110 in G200 grey cast iron
  • Worm wheel: bronze Cu Sn12 Ni2 (UNI7013-10)  
  • Ground worm profile ZI (UNI4760)  
  • Excellent mechanical strength while being especially lightweight  
  • Load capacity calculated to BS721-83 and verified according to Niemann  
  • Size 030 and over are painted with RAL 5010 blue epoxy-polyester powder in accordind to DIN 1843
  • PC, pre-stage reduction units available for motor power up to 2,2kW and size up to 090  
  • Worm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, PC+NMRV  
  • Automated manufacturing process not only guaratees fast service, but also reliability and quality  
  • Options: torque arm, output flange, output shaft kit, cover, double extention high speed shaft
...
NMRV Power Series
  • High modularity: a single basic unit to be used for different versions and motor flanges, reducing stock and delivery time
  • NMRV-POWER - fitted for motor coupling
  • Sizes: 063-075-090-110
  • Power up to 9,2 kW
  • Patented case with modern design and universal mounting
  • Reduction ratios between 7,5 and 100
  • Max torque 700 Nm
  • Die-cast aluminium alloy cases
  • Worm wheel: bronze Cu Sn12 Ni2 (UNI7013-10)
  • Ground worm profile ZI (UNI4760)
  • Excellent mechanical strength while being especially lightweight
  • Load capacity calculated to BS721-83 and verified according to Niemann
  • Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843
  • NMRV-HW - with helical unit
  • Sizes: 063-075-090-110
  • Power up to 2,2 kW
  • Reduction ratios between 22,8 e 1.083
  • Max torque 1.100 Nm
  • Options: torque arm, output flange, output shaft kit, cover, double extention high speed shaft
...
SW Series
  • Sizes: 030-040-050-063-075-090-105-110-130-150  
  • Available versions: SW - fitted for motor coupling, ISW - with input shaft, SWL - with torque limiter
  • Power up to 15 kW  
  • Patented case with modern design. Up to size 105 feet or flange mounting, from size 110 universal mounting  
  • Aluminuium units are supplied complete with synthetic oil which allows universal position mounting, with no need to modify lubricant quantity. Moreover units without plugs reduce the risk of oil oxidation and contamination.
  • Reduction ratios between 5 and 100  
  • Max torque 1.550 Nm and admissible radial loads max 16.500 N  
  • Cases up to 105 in die-cast aluminium alloy and over 110 in G200 grey cast iron  
  • Worm wheel: bronze Cu Sn12 Ni2 (UNI7013-10)  
  • Ground worm profile ZI (UNI4760)  
  • Excellent mechanical strength while being especially lightweight  
  • Load capacity calculated to BS721-83 and verified according to Niemann  
  • Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843
  • PC, pre-stage reduction units available for motor power up to 2,2kW and size up to 090  
  • Worm gear reducers are available with diffferent combinations: SW+SW, SW+ISW, PC+SW  
  • Options: torque arm, feet mounting, output flange, output shaft kit, cover, double extention high speed shaft
...
NMRX & SWX series

 The need to provide geared motors suitable for use in wet and corrosive environments has led Motovario to design a new product range specific to these fields. These products use materials, surface treatments, components and mechanical process for the motor and gearbox to increase both resistance and reliability.

Features

NMRX & SWX

  • NMRX Sizes: 040-050-063-075-090
  • SWX Sizes: 030-040-050-063-075-090-105
  • Power up to 10.4 kW
  • Reduction ratios between 5 and 100
  • Max torque 660 Nm and admissible radial loads max 10.000 N
  • Hollow low speed shaft AISI 304
  • Synthetic oil
  • Loading capacity in accordance with: ISO.14521, DIN.3996, BS 721, AGMA 6034, DIN 743, ISO 281
  • Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843
  • Available SWX geared motors ANTICORROSION Series version with Optional Special anticorrosion painting Blue RAL 5010 / Grey RAL 9006 / White RAL 9010


SWFX

  • For Food industries
  • Sizes: 030-040-050-063-075-090-105
  • Hollow low speed shaft AISI 316
  • Specific adhesive nameplate for aggressive environments
  • Specific input flange to seal Reducer/Motor coupling (IEC Motors)
  • Anti-corrosion screws AISI 316
  • Threaded holes sealed using pressed plugs without recesses
  • “Sealed” casing
  • Double lip, washdown duty oil seals with stainless steel frame
  • Shielded bearings on low speed shaft 2RS type
  • Food grade lubricant, Class H1/UH1
  • Double layer epoxy painting FDA approved white RAL 9010
...

Helical Geared Motors info

H Series
  • Sizes: 030-040-050-060-080-100-125-140
  • Available versions: H - fitted for motor coupling, IH - with input shaft, CH - with compact motor, PH - fitted for motor coupling with flexible joint
  • Cases with feet, flange or universal
  • Power up to 45 kW
  • Gears with shaved or ground profile
  • Gearing with 1, 2 and 3 reduction stages
  • Reduction ratios between 1,23 and 282,1
  • Torque max 8.000 Nm and admissible radial loads max 55.000 N
  • Cases in G200 grey cast iron for high strength and optimized with FEM analysis. Feet, flange or universal mounting
  • Excellent mechanical strength, particularly suitable to support high axial loads and high reliability
  • Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
  • Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843
  • Accessories: Output flange, backstop device
...
HA Series
  • Sizes: A30-A40-A50-A60
  • Available versions: HA - fitted for motor coupling, IHA - with input shaft, CHA - with compact motor
  • Power up to 4,8 kW
  • Gears with shaved or ground profile
  • Gearing with 1, 2 and 3 reduction stages
  • Reduction ratios between 1,3 and 353,98
  • Torque max 500 Nm and admissible radial loads max 8000 N
  • Cases in die-cast aluminium alloy; feet, flange or universal mounting
  • Excellent mechanical strength while being and particularly lightweight
  • Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
  • Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843
...

Helical Bevel Geared Motors info

B Series
  • Sizes: 060-080-100-125-140-150-160
  • Available versions: B - fitted for motor coupling, IB - with input shaft, CB - with compact motor, PB - fitted for motor coupling with flexible joint
  • Cases with feet, flange or universal
  • Power up to 90 kW
  • Gears with shaved or ground profile
  • Gearing with 2 and 3 reduction stages
  • Gleason spiral bevel gear pairs with run-in profile, mounted as second reduction stage for a higher resistance
  • Reduction ratios between 5,7 and 187,24
  • Torque max 13.000 Nm and admissible radial loads max 65000 N
  • Cases in G200 grey cast iron for high strength and optimized with FEM analysis
  • Excellent mechanical strength
  • Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
  • Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843
  • Accessories: torque arm, output flange, output shaft, shrink disk, backstop device, assembly/disassembly kit

 

...
BA Series
  • Sizes: A40-A50-A70
  • Available versions: BA - fitted for motor coupling, IBA - with input shaft, CBA - with compact motor
  • Cases with feet, flange or universal
  • Power up to 4,8 Kw
  • Gears with shaved or ground profile
  • Gearing with  2 and 3 reduction stages
  • Hypoid bevel gears for size A40 and A50, gleason bevel gear pairs for size A70, all with run-in profile
  • Reduction ratios between 7,62 and 442,76
  • Torque max 450 Nm and admissible radial loads max 5.500 N on hollow shaft and 10.000 N on solid shaft
  • Cases in die-cast aluminium alloy
  • Excellent mechanical strength while being and particularly lightweight
  • Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
  • Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843
  • Accessories: torque arm, output flange, output shaft
...

Shaft Mounted Geared Motors info

S Series
  • Sizes: 050-060-080-100-125  
  • Available versions: S - fitted for motor coupling, IS - with input shaft, CS - with compact motor, PS - fitted for motor coupling with flexible joint  
  • Universal cases
  • Power up to 22 kW  
  • Gears with shaved or ground profile   
  • Gearing with 2 and 3 reduction stages  
  • Reduction ratios between 7,34 and 394,69  
  • Torque max 3.000 Nm and admissible radial loads max 11.200 N on hollow shaft and 30.000 N on solid shaft  
  • Cases in G200 grey cast iron for high strength and optimized with FEM analysis
  • Excellent mechanical strength  
  • Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
  • Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843
  • Accessories: torque arm, output flange, output shaft, shrink disk, backstop device, assembly/disassembly kit
...

Motovariators and Inverter Motors info

S Series
  • Sizes: 003-005-010-020-030-050-100
  • Power up to 9,2 kW
  • Cases in G200 grey cast iron
  • Shafts: case hardened and tempered 20MnCr5 steel (UNI8550)
  • Internal components: 100Cr6 heat-treated steel
  • Output speed with 4 pole motors: 190 ÷ 1000, or 0 ÷ 1000 with differenzial
  • Output speed with 2 pole motors: 380 ÷ 2000, or 0 ÷ 2000 with differenzial
  • Output speed with 6 pole motors: 122 ÷ 660, or 0 ÷ 660 with differenzial
  • Torque value max 144 Nm
  • Silent, vibration-free running
  • High efficiency
  • Bidirectional rotation
  • Control handwhel positionable on either side
  • Slipping speed to max load at 5%
  • Regulation sensibility: 0,5 rpm
  • Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843
...
TXF Series
  • Sizes: 002-005-010
  • Power up to 2,2 kW
  • Cases in die-cast aluminium alloy
  • Shafts: case hardened and tempered 20MnCr5 steel (UNI8550)
  • Internal components: 100Cr6 heat-treated steel
  • Output speed with 4 pole motors: 170 ÷ 1000
  • Output speed with 2 pole motors: 340 ÷ 2000
  • Output speed with 6 pole motors: 109 ÷ 643
  • Torque value max 12 Nm
  • Silent, vibration-free running
  • High efficiency
  • Bidirectional rotation
  • Control handwhel positionable on either side
  • Slipping speed to max load at 5%
  • Regulation sensibility: 0,5 rpm
  • Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843

 

...
SMARTDRIVE Series

SINGLE PHASE

  • Single-phase supply: 230Vac ±15%
  • Vector control
  • Output speed range at constant torque rpm : 36 ÷ 1.400
  • Maximum power: 0,75 kW
  • On-board control or remote control, by keypad and potentiometer
  • Protection degree IP54, IP55, IP56, IP65, IP66
  • 4 digital inputs multifunction opto-insulated
  • Brake direct current power supply by the inverter
  • Optional boards I/O, RS485, CANBus
  • Overvoltage, undervoltage, overcurrent, overload, overtemperature protection


TREE-PHASE

  • Three-phase supply: 400Vac ±15%
  • Vector control
  • Output speed range at constant torque rpm : 36 ÷ 2.450
  • Maximum Power: 3 kW
  • On-board control or remote control, by keypad and potentiometer
  • Protection degree IP54, IP55, IP56, IP65, IP66
  • 4 digital inputs multifunction opto-insulated
  • Brake direct current power supply by the inverter
  • Optional boards I/O, RS485, CANBus
  • Overvoltage, undervoltage, overcurrent, overload, overtemperature protection

 

...

Electric Motors info

DR Series
  • Motors designed in accordance with the requirements of IEC 34 and following EEC harmonized standards
  • Fan cooled ventilation
  • Cage rotor in die-cast aluminium alloy or aluminium
  • Insulation class F or H
  • Protection degree IP55, IP56, IP65, IP66
  • Standard height to centre and dimensions from 63 to 132
  • Nominal power and dimensions according to IEC 72-1 standards from 0,09 to 11 kW
  • Available with feet mounting B3 or with flange B5 or B14
  • Poles: 2,4,6,8
  • MS brake alternate current or FM brake direct current
  • Overtemperature compatible with B Class
  • Ambient temperature + 40 ° C
  • Altitude <1000 m a.s.l.
...
M-Serie
  • Motoren, entwickelt gemäß der Vorschriften IEC 34 und gemäß der harmonisierten, aus diesen entwickelten EWG-Normen
  • Außenlüftung der Oberfläche
  • Käfigläufer aus Aluminium oder druckgegossener Alulegierung
  • Isolierungsklasse F oder H
  • Schutzgrad IP55, IP56, IP65
  • Standardabmessungen und -höhen der Achse von 63 bis 132
  • Nennleistungen und Abmessungen nach Norm IEC 72-1 von 0,12 bis 3 kW
  • Polarität: 2,4,6
  • MS-Bremse bei Wechselstrom und FM-Bremse bei Gleichstrom
  • Überhitzung kompatibel mit Klasse B
  • Umgebungstemperatur + 40 °C
  • Höhe < 1.000 m ü.M.
...